MAINTENANCE WORK ON FRAME AND ENGINE
113
Warning
Danger of accidents
Reduced road grip with new tires.
–
New tires have a smooth rolling surface and therefore cannot provide full road grip. The entire rolling surface must be rough-
ened in the first 200 kilometers (124.3 miles) by moderate riding at alternating angles. The full grip levels are not achieved
until the tires have been run in.
Info
The type, condition and air pressure of the tires all have a major impact on the handling of the motorcycle.
Worn tires have a negative effect on vehicle handling, especially on wet surfaces.
400602-10
–
Check the front and rear tires for cuts, run-in objects and other damage.
» If the tires exhibit cuts, run-in objects or other damage:
–
Change the tires.
–
Check the depth of the tread.
Info
Note local national regulations concerning the minimum tread depth.
Minimum tread depth
≥
2 mm (
≥
0.08 in)
» If the tread depth is less than the minimum permissible depth:
–
Change the tires.
–
Check the age of the tires.
Summary of Contents for 990 Supermoto R
