KTM 990 SMT, Owner'S Manual

Page: 176 / 219

CLEANING, CARE
174
–
After the motorcycle has been thoroughly cleaned with a gentle jet of water, it should
be dried with compressed air and a cloth.
Warning
Danger of accidents Reduced braking efficiency due to wet or dirty brakes.
–
Clean or dry dirty or wet brakes by riding and braking gently.
–
After cleaning, ride the vehicle a short distance until the engine warms up, applying the
brakes occasionally.
Info
The heat produced causes water at inaccessible positions in the engine and on
the brakes to evaporate.
–
After the motorcycle has cooled off, lubricate all moving parts and bearings.
–
Clean the chain. ( p. 90)
–
Treat bare metal parts (except for brake discs and exhaust system) with anti-corrosion
materials.
Cleaning and preserving materials for metal, rubber and plastic ( p. 209)
–
Treat all painted parts with a mild paint polish.
High-luster polish for paint ( p. 209)
–
Oil the ignition/steering lock, tank lock, and seat lock.
Universal oil spray ( p. 210)