KTM 990 SMT, Owner'S Manual, Page: 115 / 219

WHEELS, TIRES
113
B00632-11
–
Slide the sleeve onto the wheel speed sensor

and push them into the hole together.
Mount and tighten screw

.
Guideline
Screw, wheel speed sensor M6 6 Nm
(4.4 lbf ft)
Loctite ® 243™
–
Fasten the speed sensor cable in the bracket.
–
Position the brake calipers and check that the brake linings are seated correctly.
–
Mount screws

on both brake calipers but do not tighten yet.
–
Operate the hand brake lever repeatedly until the brake lining presses up against the
brake disc and there is a pressure point. Fix the hand brake lever in its engaged posi-
tion.
The brake calipers straighten.
–
Tighten screws

on both brake calipers.
Guideline
Screw, front brake caliper M10x1.25 45 Nm
(33.2 lbf ft) Loctite ® 243™
–
Remove the fixation of the hand brake lever.
–
Take the motorcycle off of the front wheel stand. ( p. 81)
–
Take the motorcycle off of the rear wheel stand. ( p. 82)