KTM 990 Adventure AUS/UK 2009, Owner'S Manual

Page: 131 / 213

Turn signal (RY10W / socket BAU15s) ( p. 187)
–
Check the turn signal to make sure it is functioning properly.
–
Position the diffuser.
Hook in projection

at recess

.
–
Insert the screw and first turn it counterclockwise until it engages in the thread. Tighten
the screw slightly.
Reduced luminance.
–
Grease on the bulb will evaporate due to the heat and be deposited on the reflector. Clean the bulb and keep it free of grease before
mounting.
100599-10
–
Remove nuts

at the bottom of the rear fender and pull out the tail light toward the
rear.
ProCarManuals.com