KTM 890 Adventure R US 2021 Owner'S Manual Download Page 124

Page: 124 / 411

7 COMBINATION INSTRUMENT

122

7.26.24 Heating Seat Rider (function optional)

F03319-01

Condition

• Model with seat heater.
•

Heating Seat Rider

menu (optional function) activated.

•

Heating Seat Pillion

menu (optional function) activated.

–

Press the

SET

button when the menu is closed.

–

Press the

DOWN

button until

Motorcycle

is marked. Press

the

SET

button to open the menu.

–

Press the

DOWN

button until

Heating Seat Rider

marked. Press the

SET

button to open the menu.

–

Activate menu item using the

DOWN

button.

–

Press the

SET

button to select the heating level or to switch

the rider seat heating on or off.

Info

The heating level for the passenger seat heating is
selected using the switch next to the right grab handle.

Summary of Contents for 890 Adventure R US 2021




























































































































































































































































































































































































































Search results

Summary of Contents for 890 Adventure R US 2021

Reviews:

Brands by name

Popular brands

KTM 890 Adventure R US 2021, Owner'S Manual

Search results

Summary of Contents for 890 Adventure R US 2021

Reviews:

Brands by name

Popular brands