KTM 890 ADVENTURE 2022, Owner'S Manual

Page: 147 / 171

TROUBLESHOOTING 22
145
Faults Possible cause Action
The ABS warning lamp lights
up Wheel speeds of front and rear
wheels differ greatly
–
Stop, switch off the ignition, start
again.
Malfunction in ABS
–
Read out the ABS fault memory using
the KTM diagnostics tool.
High oil consumption Engine vent hose bent
–
Route the vent hose without bends or
change it if necessary.
Engine oil level too high
–
Check the engine oil level. ( p. 137)
Engine oil too thin (low viscos-
ity)
–
Change the engine oil and the oil filter,
clean the oil screens.
( p. 137)
Headlight and position light are
not functioning Fuse 6 is blown
–
Change the fuses of individual electri-
cal power consumers. (
p. 128)
Turn signal, brake light, and
horn are not functional Fuse 5 is blown
–
Change the fuses of individual electri-
cal power consumers. (
p. 128)
Time is not displayed or not
correctly displayed Fuse 1 blown
–
Change the fuses of individual electri-
cal power consumers. (
p. 128)
12-V battery discharged Ignition was not switched off
when vehicle was parked
–
Charge the 12-V battery. ( p. 124)
The 12-V battery is not being
charged by the alternator
–
Check the charging voltage.
The combination instrument
shows nothing in the display Fuse 1 or 2 blown
–
Change the fuses of individual electri-
cal power consumers. (
p. 128)
–
Set time and date.