5
ENGLISH
Scope of supply
1x retaining bracket, alarm system
1x reed switch, self-adhesive
2x rubber spacers 18x8
2x collar bushings 6.5x9x18x8.5
2x absorbing elements
2x collar screws M6x20
2x screws M4x20
1x cable tie 300 mm
Preparatory work
- Take off the passenger seat (see Owner’s Manual).
Preassembly
- Mount rubber spacers
, absorbing elements
and collar bush-
ings
to retaining bracket
(all in scope of supply).
Assembly
- Remove screws
.
- Remove protection cap
(1
from wiring harness.
- Position retaining bracket
(in scope of supply).
- Mount screws
(in scope of supply) and tighten to 10 Nm.
- Plug alarm system
(2
(not in scope of supply) into wiring harness
(3
.
- Position alarm system on retaining bracket.
- Position protection cap
(4
and secure with cable tie
(in scope of
supply).
- Mount screws
(in scope of supply) and tighten to 2 Nm.