KTM 690 SMC R 2014, Owner'S Manual

Page: 89 / 195

11 SERVICE WORK ON THE CHASSIS
87
102009-10
–
Adjust the basic setting of the clutch lever to your hand size by turning adjusting
screw

.
–
When adjusting the clutch lever, make sure to leave a minimum clearance to other parts
of the vehicle.
Guideline
Minimum clearance 5 mm (0.2 in)
11.20 Checking/rectifying the fluid level of the hydraulic clutch
Info
The fluid level rises with increasing wear of the clutch lining disc.
Do not use brake fluid.
–
Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.
B01956-10
–
Remove screws

.
–
Remove cover

with membrane

.
–
Check the fluid level.
Fluid level under top level of container 4 mm (0.16 in)
» If the level of the coolant does not meet specifications:
–
Correct the fluid level of the hydraulic clutch.
Hydraulic fluid (15) ( p. 183)
–
Position the cover with the membrane. Mount and tighten the screws.