KTM 690 SMC R 2014, Owner'S Manual

Page: 172 / 195

22 TECHNICAL DATA
170
Screw, thermostat case M6x20 10 Nm (7.4 lbf ft) Loctite ® 243™
Screw, timing chain guide rail M6x30 10 Nm (7.4 lbf ft) Loctite ® 243™
Screw, timing chain tensioning rail M6x30 10 Nm (7.4 lbf ft) Loctite ® 243™
Screw, valve cover M6 10 Nm (7.4 lbf ft)
–
Screw, water pump cover M6x30 10 Nm (7.4 lbf ft)
–
Screw, water pump impeller M6x15 10 Nm (7.4 lbf ft) Loctite ® 243™
Oil jet, piston cooling M6x0.75 4 Nm (3 lbf ft) Loctite ® 243™
Screw plug, crankshaft clamp M8 20 Nm (14.8 lbf ft)
–
Stud, exhaust flange M8 10 Nm (7.4 lbf ft) Loctite ® 243™
Cylinder head screw M10 Tightening sequence:
Tighten diagonally, beginning
with the rear screw on the
timing chain shaft.
Step 1
15 Nm (11.1 lbf ft)
Step 2
30 Nm (22.1 lbf ft)
Step 3
45 Nm (33.2 lbf ft)
Step 4
60 Nm (44.3 lbf ft) Lubricated with engine oil
Oil line for oil pressure sensor M10x1 10 Nm (7.4 lbf ft)
–
Oil pressure sensor M10x1 10 Nm (7.4 lbf ft)
–
Plug, drain hole of water pump M10x1 15 Nm (11.1 lbf ft)
–
Screw plug, oil channel M10x1 15 Nm (11.1 lbf ft)
Loctite
®
243™
Screw plug, oil channel, for oil radiator M10x1 15 Nm (11.1 lbf ft)
–