KTM 690 Duke AUS 2012, Owner'S Manual

Page: 128 / 169

CLEANING, CARE
126
–
After rinsing the motorcycle with a gentle spray of water, allow it to dry thoroughly.
Warning
Danger of accidents Reduced braking efficiency due to wet or dirty brakes.
–
Clean or dry dirty or wet brakes by riding and braking gently.
–
After cleaning, ride the vehicle a short distance until the engine warms up, applying the
brakes occasionally.
Info
The heat produced causes water at inaccessible locations in the engine and on
the brakes to evaporate.
–
After the motorcycle has cooled off, lubricate all moving parts and bearings.
–
Clean the chain. ( p. 61)
–
Treat bare metal parts (except for brake discs and exhaust system) with anti-corrosion
materials.
Cleaning and preserving materials for metal, rubber and plastic ( p. 159)
–
Treat all painted parts with a mild paint polish.
High-luster polish for paint ( p. 159)
–
Treat all plastic parts and powder-coated parts with a mild cleaning and care product.
Paint cleaner and polish for high-gloss and matte finishes, bare metal and plastic
surfaces (
p. 160)
–
Oil the ignition/steering lock.
Universal oil spray ( p. 160)