KTM 690 Duke AUS 2012, Owner'S Manual

Page: 126 / 169

SERVICE WORK ON THE ENGINE
124
16.3
Adding engine oil
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
B00995-11
Main work
–
Remove the oil filler plug
1
with the O-ring from the clutch cover and fill up with
engine oil.
Engine oil (SAE 10W/60) (00062010035) ( p. 156)
Engine oil (SAE 10W/50) ( p. 156)
Info
For optimal performance of the engine oil, do not mix different types of engine
oil.
If appropriate, change the engine oil.
–
Install and tighten the oil filler plug
1
with the O-ring.
Danger
Danger of poisoning Exhaust gases are poisonous and inhaling them may result
in unconsciousness and/or death.
–
When running the engine, always make sure there is sufficient ventilation,
and do not start or run the engine in an enclosed space without an effective
exhaust extraction system.
–
Start the engine and check that it is oil-tight.
Subsequent work
–
Check the engine oil level. ( p. 123)