KTM 690 Duke 2019, Setup Instructions, Page: 6 / 21

2 SETUP
4
K00451-01
–
Remove the right-hand handlebar weight.
–
Position the controls on the right half of the handlebar.
Tighten the screws.
Guideline
Screw, throttle grip M5 3.5 Nm
(2.58 lbf ft)
E00174-10
Warning
Danger of accidents A repaired handlebar poses a
safety risk.
If the handlebar is bent or straightened, the mate-
rial becomes fatigued. The handlebar may break as a
result.
–
Change the handlebar if the handlebar is damaged
or bent.
–
Position handlebar.
Info
Make sure the cables and wiring are positioned cor-
rectly.
–
Position handlebar clamps. Mount and tighten the screws
evenly.
Guideline
Screw, handlebar
clamp M8 20 Nm (14.8 lbf ft)
Info
The markings on the handlebar should be at the center
of the handlebar clamps.
Keep the installed gap widths equal when tightening.
–
Mount and tighten the right handlebar weight.
–
Check the throttle grip for smooth operation.
K00452-01
–
Position the controls on the left half of the handlebar.
–
Position all controls in their exact positions on the handlebar.
Tighten all screws.