KTM 690 Duke 2018, Setup Instructions

Page: 6 / 20

2 SETUP
4
Guideline
Screw, handlebar
clamp M8 20 Nm (14.8 lbf ft)
Info
The markings on the handlebar should be at the center
of the handlebar clamps.
Keep the gap widths equal when tightening.
–
Mount and tighten the right handlebar weight.
–
Check the throttle grip for smooth operation.
K00452-01
–
Position the controls on the left half of the handlebar.
–
Position all controls in their exact positions on the handlebar.
Tighten all screws.
M01519-01
–
Mount and tighten the rear mirror adapter and rear mirror on
both sides.
H00385-01
–
Mount the footrests with the springs and pins. Secure the pins
with the lock rings.
Footrest spring plier (58429083000)
F01045-10
–
Mount reflector
1
with spring washers
2
on holding
plate
3
.
–
Mount the retaining plate on the license plate holder.
–
Mount the license plate holder.
–
Remove the protective film.
–
Carefully loosen and remove the tension belt over the
swingarm.
Info
An assistant prevents the motorcycle from falling over.