KTM 640 Duke, Owner'S Handbook Manual

Page: 31 / 52

ENGLISH
29
Main fuse
The main fuse
1
protects all power-consuming units on the motorcycle. It
is located below the seat at the starter relay.
For access to the fuse, remove the cover
2
. The capacity of the fuse is
20 A. A spare fuse can be found under the other cover
3
. When using the
spare fuse, remember to replace it as soon as possible so that a spare fuse is
always at hand.
Replace a blown fuse only with an equivalent one. If a new fuse that has
just been set in gets blown again, you are strongly advised to have it
inspected by a KTM dealer.
The fuse capacity is 20 Ampere.
!
CAUTION
!
– U
NDER NO CIRCUMSTANCES IS A STRONGER FUSE ALLOWED TO BE SET IN OR A FUSE
ALLOWED TO BE
“
REPAIRED
”. A
N INEXPERT TREATMENT COULD DAMAGE THE WHOLE
ELECTRICAL INSTALLATION
!
– C
ONTACT A SPECIALIZED
KTM
DEALER
,
SHOULD DEFECTS OF THE ELECTRIC SYSTEM
OCCUR MORE FREQUENTLY
.
Fuses for individual power-consuming units
Additional fuses separately protecting different power-consuming units are
mounted under the headlight mask.
For instructions to remove and mount the headlight mask please refer to
"Exchanging the headlight lamp".
Fuse
4
(10 Ampere) protects the following power-consuming units:
– headlight
– parking light
Fuse
5 (10 Ampere) protects the following power-consuming units:
– flasher lights
– brake light
– horn
– radiator fan motor
Fuse
6
(10 Ampere) protects the following power-consuming units:
– ignition
– starter system
Replace a blown fuse only with an equivalent one. If a new fuse that has
just been set in gets blown again, you are strongly advised to have it
inspected by a KTM dealer.
!
CAUTION
!
– U
NDER NO CIRCUMSTANCES IS A STRONGER FUSE ALLOWED TO BE SET IN OR A FUSE
ALLOWED TO BE
“
REPAIRED
”. A
N INEXPERT TREATMENT COULD DAMAGE THE WHOLE
ELECTRICAL INSTALLATION
!
– C
ONTACT A SPECIALIZED
KTM
DEALER
,
SHOULD DEFECTS OF THE ELECTRIC SYSTEM
OCCUR MORE FREQUENTLY
.
Opening the headlight mask
The headlight mask can be opened, thus providing easy access to headlight
lamps, instrument lights, indicator lamps and fuses.
Remove the screws
7
and take out the ignition key.
Lift the instrument cover in the area of the ignition lock, simultaneously
swinging the headlight mask forward.
The headlight mask can be swung forward until it rests against the fork
legs. To prevent damaging of painted surfaces, it is recommended to put a
cloth or similar material between the mask and the fork legs.
2
7
7
1
3
4
5
6