background image

ENGLISH

3

IMPORTANT INFORMATION 

»

WARRANTY

The service work specified in the "Lubrication and Maintenance Schedule" must be performed by a KTM
workshop and recorded in the service manual otherwise claims under the warranty shall become void.
No claims can be filed under the warranty for damage or consequential damage caused by manipulations
or conversions to the motorcycle.

AUTOMOTIVE FLUIDS

The fuels and lubricants specified in the Owner's Manual or automotive fluids with equivalent specifica-
tions must be used in accordance with the maintenance schedule.

SPARE PARTS, ACCESSORIES

For the safety of your child, only use spare parts and accessories approved by KTM. KTM shall not assume
any liability for other products or consequential damage resulting from the use of such products.
When special needs arise, please contact a KTM dealer, who will seek the assistance of the KTM importer
if necessary.

SAFETY

Parents should keep in mind that the safety of their youngsters always depends on the efforts made by
the parents to ensure that the motorcycle is kept in good working order and only used on safe terrains.
Nevertheless, driving the motorcycle, like driving any other vehicle, involves a potential risk. Therefore,
please make sure that all fundamental precautions are taken. Please also read the „INFORMATION ON
SAFE DRIVING FOR PARENTS“ on page 4.

TRANSPORT

When transporting your motorcycle, secure it with elastic straps or other mechaical devices in an upright
position. Be sure that the fuel tap is closed. If the motorcycle topples over, fuel can flow out of the car-
buretor or fuel tank.

ENVIRONMENT

Riding an off-highway motorcycle is a wonderful form of outdoor recreation and we certainly hope that
you and your youngsters will enjoy it to the full. However, this enjoyable outdoor activity can cause envi-
ronmental problems or lead to conflicts with other people. Responsible use of the motorcycle will prevent
such problems and conflicts. You can contribute to securing the future of motorcycling by making sure
that you and your youngsters only use the motorcycle within the limits established by the applicable laws,
making environmental protection one of your top priorities and never violating other people’s rights.

In this spirit, we hope that you and your youngsters will always safely enjoy your motorcycle!

KTM-SPORTMOTORCYCLE AG
5230 MATTIGHOFEN, AUSTRIA

Attachments: 1 spare parts manual chassis & engine

Summary of Contents for 50 SX 2008











































Reviews: