3
WORK
8
3.5
Installing the start number plate
C00418-10
–
Position the start number plate. Mount and tighten screw
1
.
Guideline
Remaining screws, chassis
M6
10 Nm (7.4 lbf ft)
The holding lugs engage.
–
Position the brake line and clamp. Mount and tighten screw
2
.
3.6
Removing the seat
C00427-10
–
Remove screw
1
.
–
Lift up the seat at the rear, pull it back and then remove it from above.
3.7
Mounting the seat
C00426-10
–
Hook in the front of the seat at the collar bushing of the fuel tank, lower it at the
rear and simultaneously it push forward.
–
Make sure that the seat is correctly locked in.
–
Mount and tighten the screw of the seat fixing.
Guideline
Remaining screws, chassis
M6
10 Nm (7.4 lbf ft)
3.8
Installing the battery
C00246-10
Main work
–
Insert the battery into the battery compartment with the terminals facing to the
front.
(All SX
‑
F models)
Battery (YTX4L-BS)
(XC
‑
F)
Battery (YTX5L-BS)
–
Reconnect rubber band
1
.
–
Connect positive cable
2
and negative cable
3
.
Guideline
Screw, battery terminal
M5
2.5 Nm
(1.84 lbf ft)
Info
Contact disks
A
must be mounted between screws
4
and cable sockets
5
with the claws facing down.
–
Slide positive terminal cover
6
over the positive terminal.
Finishing work
–
Mount the seat. (
