KTM 450 SX-F 2019, Owner'S Manual

Page: 60 / 163

11 SERVICE WORK ON THE CHASSIS
58
F01832-11
(HERLINGS REPLICA, FACTORY EDITION)
–
Tighten screws
2
.
Guideline
Screw, top triple
clamp M8 17 Nm
(12.5 lbf ft)
–
Tighten screws
3
.
Guideline
Screw, bottom
triple clamp M8 12 Nm (8.9 lbf ft)
K01014-11
–
Position the brake caliper. Mount and tighten screws
4
.
Guideline
Screw, front
brake caliper M8 25 Nm (18.4 lbf ft)
Loctite ® 243™
–
Position the brake line and the clamp. Mount and tighten
screws
5 .
Finishing work
–
Install the front wheel. ( p. 103)
11.11 Removing the lower triple clamp
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 53)
–
Remove the front wheel. ( p. 102)
–
Remove the fork legs. ( p. 56)
–
Remove the start number plate. ( p. 64)
–
Remove front fender. ( p. 65)
–
Remove the handlebar cushion.
F01561-10
Main work
(All SX
‑
F standard models, XC
‑
F US)
–
Open cable holder
1
on the left and detach the wiring
harness.
–
Remove screw 2 .
–
Remove screw
3
.
–
Take off the upper triple clamp with the handlebar and
place to one side.
Info
Cover the components to protect them against dam-
age.
Do not kink the cables and lines.