KTM 450 SX-F 2019, Owner'S Manual, Page: 58 / 163

11 SERVICE WORK ON THE CHASSIS
56
K01030-10
–
Remove screw
2
. Remove the engine guard.
11.8 Installing the engine guard (HERLINGS REPLICA, FACTORY EDITION)
K01030-11
–
Position the engine guard on the frame.
–
Mount and tighten screw
1
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
K01029-11
–
Mount and tighten screws
2
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
11.9 Removing fork legs
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 53)
–
Remove the front wheel. ( p. 102)
K01014-10
Main work
–
Remove screws
1
and take off the clamp.
–
Remove screws
2
and take off the brake caliper.
–
Allow the brake caliper and brake line to hang loosely to the
side.
Info
Do not actuate the hand brake lever when the front
wheel is removed.