KTM 450 SMR 2021, Owner'S Manual

Page: 74 / 139

11 SERVICE WORK ON THE CHASSIS
72
E01972-10
–
Now press the fluid into the system until it emerges from
hole
6
of the master cylinder without bubbles.
–
Occasionally extract the fluid from the master cylinder reser-
voir to prevent overflowing.
–
Tighten the bleeder screw and remove the bleeding syringe
with the hose. Mount the protection cap.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container
rim 4 mm (0.16 in)
–
Position the cover with the membrane. Mount and tighten the
screws.
Info
Use water to immediately clean up any brake fluid that
has overflowed or spilled.