KTM 450 SMR 2021 Page 35 Owner'S Manual Download

Page: 35 / 139

TUNING THE CHASSIS 10

10.5

Adjusting the high-speed compression damping of the shock absorber

Caution

Risk of injury

Parts of the shock absorber will move around if the shock absorber is detached incorrectly.

The shock absorber is filled with highly compressed nitrogen.

–

Please follow the description provided. (Your authorized KTM workshop will be glad to help.)

Info

The effect of the high-speed compression adjuster can be seen in fast compression of the shock absorber.

F01840-11

–

Turn adjusting screw

all the way clockwise with a socket

wrench.

Info

Do not loosen fitting

–

Turn counterclockwise by the number of turns corresponding
to the shock absorber type.
Guideline

Highspeed compression damping

Comfort

2 turns

Standard

1.5 turns

Sport

1 turn

Info

Turn clockwise to increase damping; turn counterclock-
wise to reduce damping.

10.6

Adjusting the rebound damping of the shock absorber

Caution

Risk of injury

Parts of the shock absorber will move around if the shock absorber is detached incorrectly.

The shock absorber is filled with highly compressed nitrogen.

–

Please follow the description provided. (Your authorized KTM workshop will be glad to help.)

V01427-10

–

Turn adjusting screw

clockwise up to the last perceptible

click.

–

Turn counterclockwise by the number of clicks corresponding
to the shock absorber type.
Guideline

Rebound damping

Comfort

17 clicks

Standard

15 clicks

Sport

13 clicks

Summary of Contents for 450 SMR 2021












































































































































Search results

Summary of Contents for 450 SMR 2021

Reviews:

Related manuals for 450 SMR 2021

Brands by name

Popular brands

KTM 450 SMR 2021, Owner'S Manual

Search results

Summary of Contents for 450 SMR 2021

Reviews:

Related manuals for 450 SMR 2021

Brands by name

Popular brands