KTM 390 Duke 2015 COL Owner'S Manual Download

Page: 61 / 182

RIDING INSTRUCTIONS

8.1

Checks and maintenance when preparing for use

Info

Before every trip, check the condition of the vehicle and ensure that it is roadworthy.
The vehicle must be in perfect technical condition when used.

–

Check the engine oil level. (

p. 143)

–

Check the brake fluid level of the front brake. (

p. 94)

–

Check the rear brake fluid level. (

p. 99)

–

Check the front brake linings. (

p. 96)

–

Check the rear brake linings. (

p. 102)

–

Check the brake system function.

–

Check the coolant level. (

p. 135)

–

Check for chain dirt accumulation. (

p. 81)

–

Check the chain tension. (

p. 82)

–

Check the tire condition. (

p. 110)

–

Check the tire air pressure. (

p. 111)

–

Check the settings of all controls and ensure that they can be operated smoothly.

–

Check the functioning of the electrical equipment.

–

Check that baggage is correctly secured.

–

Sit on the motorcycle and check the rear mirror setting.

–

Check the fuel level.

Summary of Contents for 390 Duke 2015 COL























































































































































































Search results

Summary of Contents for 390 Duke 2015 COL

Reviews:

Related manuals for 390 Duke 2015 COL

Brands by name

Popular brands

KTM 390 Duke 2015 COL, Owner'S Manual

Search results

Summary of Contents for 390 Duke 2015 COL

Reviews:

Related manuals for 390 Duke 2015 COL

Brands by name

Popular brands