KTM 350 SC-F, Owner'S Manual

Page: 43 / 105

SERVICE WORK ON THE CHASSIS
41
B00267-11
–
Position the angle lever and linkage lever.
–
Mount and tighten screw cap
4
.
Guideline
Nut, linkage lever to angle lever M14x1.5 80 Nm (59 lbf ft)
–
Mount and tighten screw
5
.
Guideline
Screw, bottom shock
absorber M10 60 Nm
(44.3 lbf ft) Loctite ® 2701
Subsequent work
–
Install the main silencer. ( p. 43)
–
Remove the motorcycle from the lift stand. ( p. 32)
10.22
Removing the seat
101279-10
–
Remove screw
1
.
–
Lift up the seat at the rear, pull it back and then remove it from above.
10.23
Mounting the seat
B00318-01
–
Hook in the front of the seat at the collar bushing of the fuel tank, lower it at the
rear and simultaneously it push forward.
–
Make sure that the seat is correctly locked in.
–
Mount and tighten the screw of the seat fixing.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
10.24
Removing the air filter box lid
B00323-10
–
Pull off the air filter box lid in area
A
sideways and remove it toward the front.
10.25
Installing the air filter box lid
B00323-11
–
Insert the air filter box lid into the rear area
A
and clip it into the front area
B
.