KTM 350 SC-F Owner'S Manual Download Page 15

Page: 15 / 105

CONTROLS

B00281-11

(XC

‑

The gear positions can be seen in the photograph.
The neutral or idle position is between the first and second gears.

5.12

Kick starter (XC

‑

B00601-10

The kick starter

is fitted on the right side of the engine.

The upper part of the kick starter can be folded in.

Info

Before riding, fold the upper part of the kick starter toward the engine.

5.13

Foot brake lever

B00282-10

Foot brake lever

is located in front of the right footrest.

The foot brake lever is used to activate the rear brake.

5.14

Plug-in stand (All SX

‑

F models)

B00283-10

The holder for the plug-in stand

is the left side of the wheel spindle.

The plug-in stand is used to park the motorcycle.

Info

Remove the plug-in stand before starting on a trip.

5.15

Side stand (XC

‑

B00602-10

The side stand

is on the left side of the vehicle.

Summary of Contents for 350 SC-F










































































































Search results

Summary of Contents for 350 SC-F

Reviews:

Related manuals for 350 SC-F

Brands by name

Popular brands

KTM 350 SC-F, Owner'S Manual

Search results

Summary of Contents for 350 SC-F

Reviews:

Related manuals for 350 SC-F

Brands by name

Popular brands