30/DISASSEMBLING THE ENGINE
122
304955-10
–
Take the timing chain off the camshaft gear.
–
Remove the camshafts.
19.14
Removing the cylinder head
304956-10
–
Remove nut
1
with the washer.
304957-10
–
Loosen nuts
2
in a crisscross pattern and remove them with the washers.
–
Remove the cylinder head.
304958-10
–
Remove cylinder head gasket
3
.
19.15
Removing the piston
304959-10
–
Push the cylinder upward.
Info
Only push the cylinder as far up as necessary to take the piston pin out.
–
Remove the piston pin retainer
1
.
–
Remove the piston pin.
–
Take off the cylinder and piston.
–
Push the piston upward out of the cylinder.
Info
If no further work is to be performed on the cylinder and piston, the piston
can remain in the cylinder.