KTM 250 SX-F, Setup Instructions

Page: 9 / 19

3 WORK
7
H00002-11
–
Mount and tighten screw

.
Guideline
Screw, front wheel spindle M20x1.5 35 Nm
(25.8 lbf ft)
–
Operate the hand brake lever several times until the brake linings are lying correctly
against the brake disc.
–
Remove the motorcycle from the lift stand. ( p. 6)
–
Operate the front brake and compress the fork a few times firmly.
The fork legs straighten.
–
Tighten screws

.
Guideline
Screw, fork stub M8 15 Nm
(11.1 lbf ft)
3.4 Installing the front fender
102162-10
Main work
–
Position the front fender. Mount and tighten screws

and

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Finishing work
–
Install the start number plate. ( p. 7)
3.5 Installing the start number plate
102161-10
–
Attach the start number plate to the brake line.
–
Position the start number plate. Mount and tighten screw

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
The holding lugs engage in the fender.