KTM 2015 200 Duke, Owner'S Manual

Page: 137 / 177

15 COOLING SYSTEM
135
B01553-10
–
Open bleeder screw

by three turns.
–
Tilt the vehicle slightly to the right.
–
Pour in coolant until it emerges without bubbles at the bleeder screw, and then mount
and tighten the bleeder screw immediately.
Alternative 1
Coolant ( p. 164)
Alternative 2
Coolant (mixed ready to use) ( p. 164)
–
Fill the radiator completely with coolant. Mount the radiator cap.
–
Rest the vehicle on the side stand.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result in
unconsciousness and/or death.
–
When running the engine, always make sure there is sufficient ventilation,
and do not start or run the engine in an enclosed space without an effective
exhaust extraction system.
–
Start the engine and let it run warm.
B00766-11
–
Stop the engine and allow it to cool down.
–
When the engine is cool, check the coolant level in the radiator and, if necessary, add
coolant.
–
Remove the cap of the compensating tank  and add coolant until the coolant level is
up to the MAX mark.
–
Mount the cap of the compensating tank.
–
Fit the front spoiler. ( p. 90)