KTM 2013 1190 RC8 R JP Owner'S Manual Download

Page: 177 / 272

BRAKES

175

B00578-10

–

Check all brake linings on both brake calipers to ensure they have minimum thick-
ness

Minimum thickness

≥

1 mm (

≥

0.04 in)

» If the minimum thickness is less than specified:

–

Change the front brake linings.

–

Check all brake linings on both brake calipers for damage and cracking.
» If damage or wear is encountered:

–

Change the front brake linings.

12.7

Checking the rear brake fluid level

Warning

Danger of accidents

Failure of the brake system.

–

If the brake fluid level falls below the

MIN

mark, this indicates a leakage in the brake system or worn-out brake linings. Check

the brake system and do not continue riding. (Your authorized KTM RC8 workshop will be pleased to help.)

Warning

Danger of accidents

Reduced braking efficiency due to old brake fluid.

–

Change the brake fluid of the front and rear brake according to the service schedule. (Your authorized KTM RC8 workshop will
be pleased to help.)

Summary of Contents for 2013 1190 RC8 R JP

















































































































































































































































































Search results

Summary of Contents for 2013 1190 RC8 R JP

Reviews:

Related manuals for 2013 1190 RC8 R JP

Brands by name

Popular brands

KTM 2013 1190 RC8 R JP, Owner'S Manual

Search results

Summary of Contents for 2013 1190 RC8 R JP

Reviews:

Related manuals for 2013 1190 RC8 R JP

Brands by name

Popular brands