KTM 2012 250 SX-F, System Maintenance And Repair Manual

Page: 24 / 33

18
Checking the Cylinder for Wear and Damage
Tools needed:
 8mm T-handle or socket
 10mm T-handle or socket
 30mm deep socket
 13mm hex key
 15mm deep socket
 27mm deep socket
 Flathead screwdriver
 Dial-Bore Gauge
Step 1: Removing the Cylinder
Follow steps one and two for replacing a piston on
pg. 13 and pg. 14. Once the motor is on TDC,
remove the bolts holding the cylinder in place.
Gently lift the cylinder off of the piston.
Picture 2.1 ( Enduro 360)