MAINTENANCE WORK ON FRAME AND ENGINE
195
9.72
Adjusting the play in the throttle cable
x
700317-01
–
Move the handlebar to the straight-ahead position.
–
Throttle position sensor circuit A - check in zero position.
x
Info
It is imperative to use the KTM diagnostics tool for this.
–
Push back protective cover
.
–
Loosen counter nut
.
–
Set the play in the throttle cable by turning adjusting screw
.
Guideline
Throttle cable play
3… 5 mm (0.12… 0.2 in)
–
Tighten counter nut
.
–
Mount the protective cover.
9.73
Handlebar height
700319-12
By removing or inserting spacing sleeves
, you can set the handlebar height at two differ-
ent positions.
Length of distance sleeve
15 mm (0.59 in)
With distance sleeves, the handlebar stub is positioned low for sports use. Removing the
distance sleeves gives a more upright sitting position.
Standard
Low position with distance sleeve
Summary of Contents for 2010 1190 RC8
