MAINTENANCE WORK ON FRAME AND ENGINE
147
Warning
Environmental hazard
Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Info
Never use DOT 5 brake fluid! It is silicone-based and purple in color. Oil seals and brake lines are not designed for DOT 5 brake
fluid.
Avoid contact between brake fluid and painted parts. Brake fluid is corrosive and will damage painted surfaces.
Use only clean brake fluid from a sealed container!
700262-01
–
Move the brake fluid reservoir mounted on the handlebar to a horizontal position.
–
Loosen screw.
–
Remove cap
with membrane
.
–
Add brake fluid to the
MAX
level.
Brake fluid DOT 4 / DOT 5.1 (
–
Position the cap with the membrane. Mount and tighten the screws.
Info
Clean up overflowed or spilt brake fluid immediately with water.
9.37
Brake linings
The brake linings fitted by KTM have been tested over long periods and guarantee optimal braking characteristics. The type names of the
brake linings are entered in the homologation documents.
Summary of Contents for 2010 1190 RC8
