KTM 1290 Super Duke R 2017, Owner'S Manual

Page: 54 / 247

7 COMBINATION INSTRUMENT
52
7.7 Shift warning light
E00737-01
The shift warning light is integrated in the tachometer display.
In the
Shift Light menu, the engine speed for the shift warning light can be set. The shift
warning light is always active during the running-in phase (up to 1,000 km / 621 mi). The
shift warning light can only be deactivated, and the values for
RPM1
and
RPM2
can only be
adjusted after this. The shift warning light lights up red at RPM1 and flashes red at RPM2 .
Coolant temperature > 35 °C (> 95 °F)
RPM1 shift warning light lights up red
RPM2 shift warning light flashes red
Coolant temperature
≤
35 °C (
≤
95 °F)
The shift warning light always
lights up at 6,500 rpm
7.8 Fuel level display
E00719-10
The fuel level indicator consists of bars. The more bars are lit, the more fuel is in the fuel
tank.
Info
If the fuel level is getting low, the last two segments flash red and the following
warning note also appears
LOW FUEL .
The fuel level is displayed with a slight delay to prevent the indicator from con-
stantly moving while riding.
The fuel level display is not updated while the side stand is folded out or the emer-
gency off switch is switched off.
Once the side stand is folded up and emergency OFF switch is switched on, the fuel
level display is next updated after 2 minutes.
The fuel level display flashes if the combination instrument does not receive a signal
from the fuel level sensor.