KTM 1290 Super Duke R 2017, Owner'S Manual, Page: 138 / 247

13 SERVICE WORK ON THE CHASSIS
136
13.17 Checking the chain tension
Warning
Danger of accidents Incorrect chain tension damages components and results in accidents.
If the chain is tensioned too much, the chain, engine sprocket, rear sprocket, transmission and rear wheel bearings wear more
quickly. Some components may break if overloaded.
If the chain is too loose, the chain may fall off the engine sprocket or the rear sprocket. As a result, the rear wheel locks or the
engine will be damaged.
–
Check the chain tension regularly.
–
Set the chain tension in accordance with the specification.
Preparatory work
–
Lift the motorcycle with the rear lifting gear. ( p. 123)
E00691-10
Main work
–
Shift the transmission to idle .
–
At the chain sliding guard in the area of markings
A
and
B
, push the chain upward
and determine the chain tension.
Info
The lower chain section must be taut.
Chain wear is not always even, so you should repeat this measurement at differ-
ent chain positions.
The upper edge of the chain is located between markings
A
and
B
.
» If the chain tension does not meet the specification:
–
Adjust the chain tension. ( p. 137)