KTM 125 EXC EU 2012, Setup Instructions, Page: 13 / 20

WORK
11
Subsequent work
–
Mount the seat. ( p. 8)
3.7
Installing the front fender
B00814-10
–
Ensure that the spacers are mounted in the fender.
–
Position the front fender. Mount and tighten screws
1
.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Info
Make sure the holding lugs engage in the start number plate.
3.8
Refitting the headlight mask with the headlight (All EXC models)
303402-11
Main work
–
Connect the electric plug connector
1
.
B00833-11
–
Position the headlight mask and fix it with the rubber band
2
.
Info
Ensure that the holding lugs engage in the fender.
–
Position the brake line and wiring harness. Put on the clamp and mount and
tighten screw
3
.
Subsequent work
–
Check the headlight setting.
3.9
Installing the start number plate (XC-W)
500123-11
–
Position the start number plate. Mount and tighten screw
1
.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Info
Ensure that the holding lugs engage in the fender.
–
Position the brake line. Put on the clamp and mount and tighten screw
2
.