KTM 1190 RC8 R USA, Owner'S Manual

Page: 98 / 281

6 CONTROLS
96
400460-01
–
Press the button and the button for 3 - 5 seconds.
–
Press the button twice until the symbol shows SETTINGS in the info display.
–
Press the MODE button briefly.
–
Press the MODE button briefly.
RPM1
and
RPM2
appear on the info display.
The engine speed after
RPM1
flashes.
Info
The engine speed can be set at intervals of 50.
RPM1
is the engine speed above which the shift warning light starts to flash.
–
Set the engine speed with the button or the button .
–
Press the MODE button briefly.
The engine speed after RPM2 flashes.
Info
RPM2 is the engine speed above which the shift warning light lights up con-
stantly. If RPM1 = RPM2 , the shift warning light lights up constantly when you
reach the engine speed set.
–
Set the engine speed with the button or the button .
–
Press the
MODE
button briefly.
The settings are stored and the display switches to the SETTINGS menu.
Info
At delivery, RPM1 is set to 10000 and RPM2 to 10500.
–
Press the button briefly and repeatedly until the symbol shows BACK... in the info
display.