WORK
6
700362-01
–
Tighten the screw.
Guideline
Screw, handlebar stub
M8
20 Nm
(14.8 lbf ft)
–
Repeat the adjustments on the other handlebar stub.
–
Move the handlebar to and fro over the entire steering range.
» If the cables restrict the freedom of movement of the steering:
–
Correct the cable routing.
3.2
Removing the seat
700245-01
–
Insert the ignition key in the seat lock
and turn it anticlockwise.
–
Raise the rear of the seat, push it towards the rear, and remove it upwards.
3.3
Fitting the passenger seat
700275-01
–
Position the passenger seat in the space provided.
–
Press down the passenger seat until it clicks into place.
–
Finally, check that the passenger seat is correctly mounted.
3.4
Fitting the seat
700269-01
–
Position the recesses of the seat to the lugs on the frame, lower the rear end and
simultaneously push it forward.
–
Lock the seat by turning the ignition key in the seat lock.
–
Remove the ignition key from the seat lock.
–
Finally, check that the seat is correctly mounted.
3.5
Recharging the battery
Warning
Risk of injury
Battery acid and battery gases cause serious chemical burns.
–
Keep batteries out of the reach of children.
–
Wear suitable protective clothing and goggles.
–
Avoid contact with battery acid and battery gases.
–
Keep the battery away from sparks or open fire. Charge only in well-ventilated rooms.
–
In the event of skin contact, rinse with large amounts of water. If battery acid gets in the eyes, rinse with water for at least
15 minutes and contact a physician.
Warning
Environmental hazard
Components and battery acid are a danger to the environment.
–
Do not dispose of batteries in normal household waste. Take defective or used batteries to a battery recycling operator.
