WORK
5
3WORK
3.1
Adjusting the handlebar height
Info
The handlebar stub position must be identical on the left and right of the vehicle.
700318-01
Adjusting the high position of the handlebar stubs:
–
Loosen screw
.
Info
Loosen the screw several turns to prevent damage to the fork lacquer
when moving the handlebar stub.
–
Remove screw
.
700319-01
–
Remove distance sleeve
.
–
All cables routed under the upper triple clamp must now be routed under the
handlebar stub.
–
Push the handlebar stub carefully up to the upper triple clamp.
–
Position the distance sleeve above the triple clamp.
–
Mount and tighten the screw.
Guideline
Remaining chassis screws
M5
5 Nm (3.7 lbf ft)
700320-01
–
Tighten the screw.
Guideline
Screw, handlebar stub
M8
20 Nm
(14.8 lbf ft)
–
Repeat the adjustments on the other handlebar stub.
–
Move the handlebar to and fro over the entire steering range.
» If the cables restrict the freedom of movement of the steering:
–
Correct the cable routing.
700320-11
Adjusting the low position of the handlebar stubs:
–
Loosen screw
.
Info
Loosen the screw several turns to prevent damage to the fork lacquer
when moving the handlebar stub.
700319-11
–
Remove screw
with distance sleeve
.
–
Carefully shift the handlebar stub by the length of the distance sleeve.
Guideline
Long distance sleeve
15 mm (0.59 in)
–
Lay all cables between the upper triple clamp and the handlebar stub.
–
Position the distance sleeves.
–
Mount and tighten the screw.
Guideline
Remaining chassis screws
M5
5 Nm (3.7 lbf ft)
