KTM 1190 Adventure R EU Page 106 Owner'S Manual Download | Manualshive

Page: 106 / 238

background image

12

SUSPENSION SETTING

104

12.1

"Damping" (Option: With EDS)

401831-01

Possible states

• SPORT

–

Firm tuning of the spring elements with very direct feedback from the chas-

sis

• STREET

–

Normal tuning of the spring elements with direct feedback from the chassis

• COMFORT

–

Soft tuning of the spring elements with good feedback from the chassis

Different tunings for the damping of the spring elements can be selected in the

"Damp-

ing"

menu. You can choose from

"SPORT"

,

"STREET"

, and

"COMFORT"

.

12.2

"Load" (Option: With EDS)

401833-01

Tunings for different vehicle loading states can be selected in the

"Load"

menu. A selection

can be made between one-person operation, one-person operation with luggage, two-person
operation, and two-person operation with luggage.
The load mode selected last is displayed on the right in the segment display.

Info

For the setting to be accepted by the motorcycle, the motorcycle must be stationary
and the engine must be running.
The symbol of the last load status flashes until the new setting is adopted.

«
...
104
105
106
107
108
...
»

Summary of Contents for 1190 Adventure R EU















































































































































































































































Reviews:

No comments

Related manuals for 1190 Adventure R EU

Brand: probrake Pages: 2

Brand: N-Com Pages: 2

Brand: Takegawa Pages: 2

SBL.04.650.10000/B

Brand: SW-Motech Pages: 2

CoreManual TorqDrive

Brand: Rekluse Pages: 20

Brand: Honda Pages: 137

Brand: GYS Pages: 36

KAWASAKI ZX6R 2007/8

Brand: Evotech Performance Pages: 2

Easyrack 661658 01 01

Brand: hepco & becker Pages: 4

Brand: Bajaj Pages: 319

Brand: DYNATEK Pages: 3

Brand: DYNATEK Pages: 6

Brand: Husqvarna Pages: 7

Brand: hepco & becker Pages: 3

H-NAPE CHINSTRAP

Brand: Fast Pages: 24

Brand: Montesa Pages: 114

4Ride MST260 2016

Brand: Montesa Pages: 158

Brand: BMW Pages: 160

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands