6
ENGLISH
Scope of supply
1x license plate holder, short
1x lower rear panel
1x license plate base EU (preassembled)
2x oval head screws M6x18
2x distance piece bushings
2x nuts M6
Preparatory work
- Take off the passenger seat (see the Owner’s Manual).
Disassembling the original license plate holder
- Disconnect plug-in connector
for license plate lamp.
- Disconnect plug-in connector
for left turn signal.
- Disconnect plug-in connector
for right turn signal.
- Remove screws
(1
.
- Remove screws
(2
.
- Remove original license plate holder with wire.
Disassembling the turn signal
- Remove screws
(3
.
- Slip out wire and remove original license plate holder.
