ENGLISH
18
2x left
Tighten the retaining clamp:
2x right
Fix the connecting pipe on the front right of the frame using the M8x25 col-
lar screw
(1)
and the D8.5 washer
(Loctite 243)
Tighten the flange nuts at the front and rear.
Push the M5 multifunction nut
(2)
on to the new fairing bracket
(3)
.
NOTE:
Two different fairing brackets are supplied.
If you ride with the standard footrest system, bracket
(A)
must be fitted.
If you ride with the optionally available footrest system
(690.03.937.044)
,
bracket
(B)
must be fitted.
Remove the screws of the footrest system and fit the fairing bracket
(3)
as
shown in the picture.
Refit the footrest system and tighten the screws (25Nm, Loctite 243).
1
3
3
2
B
A
