-19-
4.2 Interpretation
Each switched port has three LED indicators to indicate its own port
status. The interpretations of each LED are:
POWER LED :
indicates the status of the power supplied to the switch.
Link/Act. LED :
indicates the port cable link and traffic activity.
10/100M LED :
indicates the connection speed used
Duplex/Col. LED :
indicate the duplex mode used and collision status
FX-1, FX-2 :
indicate the fiber module is enabled.
The states and indications are:
LED
STATE
INDICATION
POWER
Off
No power is supplied to the device.
POWER
On
Power is supplied to the device.
Link/Act.
On
An active link is established.
Link/Act.
Off
No active link is established.
Link/Act.
Blink
There are Tx or Rx activities.
10/100M
On
100Mbps speed is used.
10/100M
Off
10Mbps speed is used.
Duplex/Col.
On
Full duplex mode is used.
Duplex/Col.
Off
Half duplex mode is used.
Duplex/Col.
Blink
Collision occurrences
FX-1
On
The module in FX-1 slot is enabled.
FX-2
On
The module in FX-2 slot is enabled.
Note:
The port status of the active links on FX-1 slot and FX-2 slot are also
indicated on Port 1 and Port 3 LEDs respectively.
