KTI Networks Modular Media Converter Center System KC-1300, Operation Manual

Page: 19 / 63

-19-
Insertion of System Power Chassis
Before inserting the power chassis into system unit, make sure:
•
The system power switch is turned off.
•
The power cord is disconnected from the power chassis.
To insert the power chassis, hold the handle and push it into system unit
until it is seated in system chassis properly. Screw the chassis securely in
the system unit. See figure below:
The power chassis is designed to be hot plugged into or unplugged
from the system even when another power chassis is installed in
another power slot and in operation.