KTI Networks KSD-800M Series Installation Manual Download | Manualshive

Page: 27 / 65

background image

-27-

3.1.3.1 Port-based Priority Setting (per port setting)

As one port is configured to be enabled for port-based priority, all received packets on the port will be
classified as high priority. The options are:

Enable -

All packets received on the port are classified as high priority

Disable -

Port-based classification is not applied.

3.1.3.2 802.1p Classification (per port setting)

For a received 802.1Q VLAN tagged packet, the switch will check the 3-bit User Priority value in TCI
(Tag Control Information) field of packet tag data. If the priority value is equal or larger than a config-
ured 802.1p High Priority Tag Setting, the packet is classified as high priority.

Enable -

Tagged packets received on the port are classified by comparing the packet

’

s User

Priority value and 802.1p High Priority Tag Threshold Setting.

Disable -

802.1p classification is not applied.

3.1.3.3 DSCP Classification (per port setting)

As a port is enabled for IP DSCP classification, the switch will check the DiffServ Code Point (DSCP)
value of the IP packets received on the port.

Enable -

IP packets received on the port are classified by checking the packet

’

s DSCP value.

Disable -

DSCP classification is not applied.

The following checks are performed to classify the packet priority:
1. Default DSCP : If the packet’s DSCP value is one the default code point listed below, the

packet is classified as high priority. EF - <101110>, AF - <001010> <010010> <011010>
<100010> and Network Control - <111000> <110000>.

2. User Defined DSCP : If the packet

’

s DSCP value matches the user defined DSCP(A) and

DSCP(B) settings, the packet is classified as high priority. DSCP(A) and DSCP(B) settings will
be described later.

User defined DSCP(A) and DSCP(B) can be enabled respectively.

User Defined DSCP(A) Classification (Global)
User can configure a specific DSCP value in DSCP(A) setting as high priority beside default DSCPs.

Enable -

Enable DSCP(A) checking

Disable -

DSCP(A) classification is not applied.

User Defined DSCP(B) Classification (Global)
User can configure a specific DSCP value in DSCP(B) setting as high priority beside default DSCPs.

Enable -

Enable DSCP(B) checking

Disable -

DSCP(B) classification is not applied.

«
...
25
26
27
28
29
...
»

Summary of Contents for KSD-800M Series


































































Reviews:

No comments

Related manuals for KSD-800M Series

Brand: Watchguard Pages: 39

Brand: ZyXEL Communications Pages: 299

Brand: Moxa Technologies Pages: 2

Brand: Valcom Pages: 4

Brand: Lanner Pages: 38

Brand: Allied Telesis Pages: 34

Brand: Network Critical Pages: 200

Brand: Patton electronics Pages: 145

VAR-SOM-MX8M-PLUS

Brand: Variscite Pages: 2

Brand: Hama Pages: 7

Xtreme Networked Boat

Brand: Broadband Products Pages: 16

TeleLite 720920 Series

Brand: Positron Pages: 21

Brand: Planet Pages: 67

Barricade g SMC2804WBRP-G

Brand: SMC Networks Pages: 53

Brand: NetApp Pages: 10

Brand: Ozito Pages: 8

PMP/PTP 450 Series

Brand: Cambium Networks Pages: 155

Brand: Cambium Networks Pages: 228

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands