-7-
1.4 Specifications
Copper Ports w/h PSE (P2-P5)
Compliance
IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX
Connectors
Shielded RJ-45 jacks
Pin assignments
Auto MDI/MDI-X detection
Configuration
Auto-negotiation
Transmission rate
10Mbps, 100Mbps
Duplex support
Full/Half duplex
Network cable
Cat.5 UTP
Power over Ethernet
IEEE 802.3af-compliant PSE (function equipped in PoE Model only)
Combo Port (P1)
Compliance
IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX/100Base-FX
Interface Selection
Fiber is selected if an SFP fiber transceiver is installed in SFP slot
Copper Interface
Connector
Shielded RJ-45 jack
Pin assignments
Auto MDI/MDI-X detection
Configuration
Auto-negotiation or software control
Transmission rate
10Mbps, 100Mbps
Duplex support
Full/Half duplex
Network cable
Cat.5 UTP
Fiber Interface
Connector
SFP slot for optional SFP type fiber transceivers
Configuration
100Mbps, Full duplex
Far End Fault Support
Enabled
Network cables
MMF 50/125 60/125, SMF 9/125
Eye safety
IEC 825 compliant
Switch Functions
MAC Addresses Table
1K entries
Forwarding & filtering
Non-blocking, full wire speed
Switching technology
Store and forward
Maximum packet length
1536 bytes
Flow control
IEEE 802.3x pause frame base for full duplex operation
Back pressure for half duplex operation
Broadcast Storm
Protection design
