KTI Networks KS-2262 User Manual Download

Page: 83 / 256

3-7-4. Port-based Group

Function name:

Port-based Group Configuration

Function description:

It shows the information of the existed Port-based VLAN Groups. You can
easily create, edit and delete a Port-based VLAN group by pressing

<Add>

<Edit>

and

<Delete>

function buttons. User can add a new VLAN group by

inputting a new VLAN name.

Parameter description:

VLAN Name:

The name defined by administrator is associated with a VLAN group.
Valid letters are A-Z, a-z, 0-9, “

“ and “_” characters. The maximal

length is 15 characters.

Member:

This is used to enable or disable if a port is a member of the new added
VLAN, “Enable” means it is a member of the VLAN. Just tick the check
box beside the port x to enable it.

Fig. 3-24

Summary of Contents for KS-2262

































































































































































































































































Search results

Summary of Contents for KS-2262

Reviews:

Related manuals for KS-2262

Brands by name

Popular brands

KTI Networks KS-2262, User Manual

Search results

Summary of Contents for KS-2262

Reviews:

Related manuals for KS-2262

Brands by name

Popular brands