KTI Networks KS-2262, User Manual

Page: 219 / 256

217
---------------------------
set pri-tag
Syntax :
set pri-tag [<q0><priority>] [<q1><priority>] [<q2><priority>] [<q3><priority>]
Description :
To set 802.1p qos weighting for 4 queues.
Argument :
<q>: queue level, q0: queue 0; q1: queue 1; q2: queue 2; q3: queue 3.
<priority>: priority level. One queue has been assigned 2 different priorities.
You don't need to use all of queues, but must assign queues in order.
Syntax: 1,2 or 2,5-7, available from 0 to 7.
Possible value:
<priority>: 0 to 7.
Example:
FEL2SW-26 (qos)# set pri-tag q0 0 q1 2 q3 4
---------------------------
set sche
Syntax
:
set sche <wrr|strict> <wrr_0> <wrr_1> <wrr_2> <wrr_3>
Description :
To set qos schedule and weight for 4 queues.
Argument :
<wrr> : scheduling weighted round robin method
<strict> : scheduling strict method.
<wrr_0 to 3>: weighted for every queue. Weighted range : 1-55.
Possible value:
<wrr|strict>: wrr or strict
<wrr_0 to 3>: 1-55.
Example:
FEL2SW-26 (qos)# set sche wrr 1 2 8 16
---------------------------
set tos
Syntax :
set tos <type_value> [<q0><priority>] [<q1><priority>] [<q2><priority>]
[<q3><priority>]
Description :
To set IP tos qos weighting for 4 queues.
Argument :
<type_value>: Delay Priority: 0;
Throughput Priority: 1;
Reliability Priority: 2;
Monetary Cost Priority: 3.
<q>: queue level, q0: queue 0; q1: queue 1; q2: queue 2; q3: queue 3.
<priority>: priority level. One queue has been assigned 2 different priorities.
You don't need to use all of queues, but must assign queues in order
(from low queue to high queue).
Syntax: 1,2 or 2,5-7, available from 0 to 7.