9
Inserting DC power plug first
Insert the DC cable of the power adapter to the injector DC IN jack as shown
below:
Applying AC power
The AC-DC48V power adapter used to supply the 48VDC power for the
injector can receive AC voltage within a range of +90 ~ 264VAC. It supports
the commercial power available worldwide. Use a proper AC power cable
matching the AC outlet in your area.
Note:
Make sure the DC plug is properly seated in the DC jack before
applying AC power.
Connecting network cables
1. Connect IN jack to the switched port of a Fast Ethernet switch or Gigabit
Ethernet switch.
2. Connect OUT jack to the 802.3af compliant powered device via PoE over
Cat.5.
