KTI Networks KPOE-100 Installation Manual Download Page 3

3

The information contained in this document is subject to change without prior notice.
Copyright (C) All Rights Reserved. 

TRADEMARKS 

Ethernet is a registered trademark of Xerox Corp.   

FCC NOTICE

This device complies with Class B Part 15 the FCC Rules. Operation is subject to the 
following two conditions: (1) This device may not cause harmful interference, and (2) this 
device must accept any interference received including the interference that may cause. 

CE NOTICE

Marking by the symbol  indicates compliance of this equipment to the EMC directive of the 
European Community. Such marking is indicative that this equipment meets or exceeds the 
following technical standards: 

EMC Class B 
EN 50081-1/1992 : EN55022:1994/A1:1995/A2:1997 Class B 
     EN61000-3-2:2000 
     EN61000-3-3:1995/A1:2001 
EN 55024:1998/A1:2001 
     IEC 

61000-4-2:1995 

     IEC 

61000-4-3:1995 

     IEC 

61000-4-4:1995 

     IEC 

61000-4-5:1995 

     IEC 

61000-4-6:1996 

     IEC 

61000-4-8:1993 

     IEC 

61000-4-11:1994 

SAFETY CAUTION 

To reduce the risk of bodily injury, electrical shock, fire, and damage to the product, observe 
the following precautions. 

•  Do not service any product except as explained in your system documentation.   

•  Opening or removing covers may expose you to electrical shock. 

•  Only a trained service technician should service components inside these compartments. 

•  If any of the following conditions occur, unplug the product from the electrical outlet and 

replace the part or contact your trained service provider: 

 

- The power cable, extension cable, or plug is damaged. 

 

- An object has fallen into the product. 

 

- The product has been exposed to water. 

 

- The product has been dropped or damaged. 

 

- The product does not operate correctly when you follow the operating instructions. 

•  Do not push any objects into the openings of your system. Doing so can cause fire or 

electric shock by shorting out interior components. 

•  Operate the product only from the type of external power source indicated on the electrical 

ratings label. If you are not sure of the type of power source required, consult your service 
provider or local power company. 

Summary of Contents for KPOE-100











Reviews: