71
4-2-9 IGMP Snooping
Function name:
IGMP Snooping Configuration
Function description:
IGMP Snooping
lets administrators configure a switch to constrain multicast
traffic by listening to Internet Group Management Protocol (IGMP). After
finishing the settings, please press
<Apply>
button to start up the function.
Parameter description:
IGMP Enabled:
Just tick the check box (
;
)
to enable this function.
Default: disable
Router Ports:
Just tick the check box (
;
)
beside the port x to enable router ports, then
press the
<Apply>
button to start up.
Default: none
Unregistered IGMP Flooding enabled:
Just tick the check box (
;
)
to enable this function.
Default: enable
VLAN ID:
At the IGMP Enable mode being selected, it will list the VLAN ID number.
IGMP Snooping Enabled:
After IGMP Enabled function start up then user can tick the check box (
;
)
to
enable this function.
Default: enable
IGMP Querying Enabled:
After IGMP Enabled function start up then user can tick the check box (
;
)
to
enable this function.
Default: enable
Fig. 4-19 IGMP Configuration
Summary of Contents for KGS-2404
