Tension Spring Tool (ABX-35)
A Hooking Tool that is used for installing the Tension Spring of Drum Brake.
This tool can be used for standard-sized automobile and small track (2 tons class).
Please use this product only for its intended use.
Do not use the tool if there is crack or deformation.
This Hooking Tool has sharp point. Use with Caution.
Usage Instructions
1. Insert and Hook the
Tension Spring on Shoe’s Hole,
then set opposite side on Tension Spring Too
l’s shaft.
2. Insert the Tip of Shoe into Shoe
’s Hole, then extend the spring.
3. Slide and guide the Tension Spring
to the Shoe’s Hole.
NOTE: In case it is difficult to insert the Tension Spring
into Shoe’s Hole, rotate the Tension Spring Tool.
Tension Spring Tool (AB-7)
T-Shaped Hooking Tool that is used for removing the Tension Spring of Drum Brake.
This tool can be used for standard-sized automobile and small track (2 tons class).
Please use this product only for its intended use.
Do not use the tool if there is crack or deformation.
This Hooking Tool has sharp point. Use with Caution.
Usage Instructions
1. Hook the tip on Tension Spring.
2. Pull the Tension Spring and remove it from Shoe.
NOTE: To avoid any accident, make sure that tip hooks
Tension Spring firmly.