Parking Shoe Lever Tool (ABX-32)
Pliers that are used for installing the Parking Brake Cable to Parking
Brake Shoe, and removing.
This pliers can be used for standard-sized automobile and small track
(2 tons class).
Please use this product only for its intended use.
Do not use the tool if there is crack or deformation.
Pliers have sharp point. Use with Caution.
Usage Instructions
Removing Brake Cable
1. Insert Claw into both ends of Shoe Lever.
2. Hold the grip, and compress the spring.
Remove the Brake Cable from Shoe Lever.
Installing Brake Cable
1. Insert Claw between spring and Caulking part.
Insert the Claw all the way.
2. Hold the grip, and compress the spring.
Install the Brake Cable into Shoe Lever.
Shoe Hold Spring Tools (ABX-33, 34)
Screwdrivers that are used for installing / removing the Shoe Hold Spring of Drum Brake.
This pliers can be used for standard-sized automobile and small track (2 tons class).
Please use this product only for its intended use.
Do not use the tool if there is crack or deformation.
ABX-33 (Shoe Hold Down Spring)
Use for Flat Spring Type
ABX-34 (Spring Cap)
Use for Coil Spring Type
Usage Instructions
1. Press Shoe Hold Spring Tools against the Shoe
Hold Down Spring / Spring Cap.
2. Rotate 90 degree and remove spring.
NOTE: Carry out installation in the reverse order
to removal.